Re: [PATCH 1/4] dt-bindings: mmc: renesas_sdhi: Add r8a77470 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 25, 2018 at 08:47:38AM +0200, Geert Uytterhoeven wrote:
> Hi Fabrizio,
> 
> On Mon, Sep 24, 2018 at 8:34 PM Fabrizio Castro
> <fabrizio.castro@xxxxxxxxxxxxxx> wrote:
> > > Subject: Re: [PATCH 1/4] dt-bindings: mmc: renesas_sdhi: Add r8a77470 support
> > > On Fri, Sep 21, 2018 at 1:55 PM Fabrizio Castro
> > > <fabrizio.castro@xxxxxxxxxxxxxx> wrote:
> > > > Document SDHI support for the RZ/G1C (a.k.a. R8A77470) SoC.
> > > >
> > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> > > > Reviewed-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> 
> > > > --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> > > > +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> > > > @@ -17,6 +17,7 @@ Required properties:
> > > >                 "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
> > > >                 "renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC
> > > >                 "renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC
> > > > +               "renesas,sdhi-r8a77470" - SDHI IP on R8A77470 SoC
> > > >                 "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
> > > >                 "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
> > > >                 "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
> > >
> > > It seems RZ/G1C has two slighty different types of SD card interfaces:
> > >   1. SDHI0 and SDHI2 use SYS-DMAC,
> > >   2. SDHI1 can also be used as an MMC interface, and has an internal DMAC.
> > >
> > > Do we need to distinguish between them using the compatible value, or
> > > are there other ways?
> >
> > The most sensible thing to do here is probably to distinguish between them using
> > the compatible value, we were thinking about using the following for SDHI1:
> > compatible = "renesas,sdhi-mmc-r8a77470", "renesas,rcar-gen3-sdhi";
> >
> > What do you guys think?
> 
> Oh, so it's identical (or "sufficiently compatible") with the SD card
> interface on R-Car Gen3?
> "renesas,sdhi-mmc-r8a77470" may be a good way to distinguish.
> I'm a bit reluctant to add "renesas,rcar-gen3-sdhi", though.

I am also reluctant to add "renesas,rcar-gen3-sdhi", because as we are
seeing things are not so simple wrt to compatible.

Can I clarify the proposal regarding "renesas,sdhi-mmc-r8a77470",
would it be as well as or instead of "renesas,sdhi-r8a77470" ?

And what is signified by "mmc" that is not implied by (some of the)
existing compat strings?


Perhaps stating the obvious: this feels a lot like the problem we thought
we had with different Gen-3 SoCs/ES versions. And in that case we decided
against using compat strings to differentiate. The main difference here
seems to be that we need to differentiate between different ports on the
same SoC.



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux