The OSTM timer driver for RZ/A2 uses TIMER_OF_DECLARE which requires the
ostm module clocks to be registers early in boot.
This series add early clock support to cpg-mssr
Here are some notes I took:
* Switched to using
of_iomap(cpg_np, 0)
instead of
platform_get_resource(pdev, IORESOURCE_MEM, 0)
* All devm_xxx calls were replaced with the traditinal functions because
'dev' is not available for early probe
* some functions are still using dev_dbg and dev_err for messages, but
in early init, dev is set to NULL so it doesn't crash, the messages
just look like this:
(NULL device *): Core clock extal at 24000000 Hz
(NULL device *): clock (1, 35) is ostm1 at 66000000 Hz
* np was added to priv
np is saved because dev->of_node doesn't exist during early init and we
need to avoid using 'dev' for any function that will run during early
init
* all .init functions (r8xxxx_cpg_mssr_init) for the SoCs do not use dev,
except for r8a7791_cpg_mssr_init for the lines:
struct device_node *np = dev->of_node;
of_device_is_compatible(np, "renesas,r8a7793-cpg-mssr")
But, so if early clock support was every needed for r8a7791 or r8a7793,
that line will need to be changed.
* In r7s9210-cpg-mssr.c, I moved updating the clock ratio table to a
separate function (r7s9210_update_table) because it looks cleaner.
Chris Brandt (2):
clk: renesas: cpg-mssr: Add early clock support
clk: renesas: r7s9210: Convert some clocks to early
drivers/clk/renesas/r7s9210-cpg-mssr.c | 141 +++++++++++++++++++++------------
drivers/clk/renesas/renesas-cpg-mssr.c | 106 ++++++++++++++++++++-----
drivers/clk/renesas/renesas-cpg-mssr.h | 6 ++
3 files changed, 181 insertions(+), 72 deletions(-)
--
2.16.1
