Hi Kieran,
Thank you for the patch.
On Friday, 31 August 2018 17:40:40 EEST Kieran Bingham wrote:
> DRM pipelines now support tri-planar as well as packed formats with
> YCbCr, however the pitch calculation was not updated to support this.
>
> Correct this by adjusting the bytesperline accordingly when 3 planes are
> used.
>
> Fixes: 7863ac504bc5 ("drm: rcar-du: Add tri-planar memory formats support")
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
I already have a similar patch from Matsuoka-san in my tree, please see
https://patchwork.kernel.org/patch/10425565/. I'll update it with the fixes
tag.
> ---
> drivers/media/platform/vsp1/vsp1_drm.c | 10 ++++++++++
> include/media/vsp1.h | 2 +-
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
> b/drivers/media/platform/vsp1/vsp1_drm.c index b9c0f695d002..b9afd98f6867
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -814,6 +814,16 @@ int vsp1_du_atomic_update(struct device *dev, unsigned
> int pipe_index, rpf->format.num_planes = fmtinfo->planes;
> rpf->format.plane_fmt[0].bytesperline = cfg->pitch;
> rpf->format.plane_fmt[1].bytesperline = cfg->pitch;
> +
> + /*
> + * Packed YUV formats are subsampled, but the packing of two components
> + * into a single plane compensates for this leaving the bytesperline
> + * to be the correct value. For multiplanar formats we must adjust the
> + * pitch accordingly.
> + */
> + if (fmtinfo->planes == 3)
> + rpf->format.plane_fmt[1].bytesperline /= fmtinfo->hsub;
> +
> rpf->alpha = cfg->alpha;
>
> rpf->mem.addr[0] = cfg->mem[0];
> diff --git a/include/media/vsp1.h b/include/media/vsp1.h
> index 3093b9cb9067..0ce19b595cc7 100644
> --- a/include/media/vsp1.h
> +++ b/include/media/vsp1.h
> @@ -46,7 +46,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int
> pipe_index, /**
> * struct vsp1_du_atomic_config - VSP atomic configuration parameters
> * @pixelformat: plane pixel format (V4L2 4CC)
> - * @pitch: line pitch in bytes, for all planes
> + * @pitch: line pitch in bytes
Should I update the above-mentioned patch with this as well ? How about
phrasing it as "line pitch in bytes for the first plane" ?
> * @mem: DMA memory address for each plane of the frame buffer
> * @src: source rectangle in the frame buffer (integer coordinates)
> * @dst: destination rectangle on the display (integer coordinates)
--
Regards,
Laurent Pinchart
