Re: [PATCH 03/16] dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On Friday, 14 September 2018 11:00:46 EEST jacopo mondi wrote:
> On Tue, Sep 04, 2018 at 03:10:14PM +0300, Laurent Pinchart wrote:
> > On the D3 and E3 SoCs, the LVDS encoder can derive its internal pixel
> > clock from an externally supplied clock, either through the EXTAL pin or
> > through one of the DU_DOTCLKINx pins. Add corresponding clocks to the DT
> > bindings.
> > 
> > To retain backward compatibility with DT that don't specify the
> > clock-names property, the functional clock must always be specified
> > first, and the clock-names property is optional when only the functional
> > clock is specified.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > ---
> > 
> >  .../devicetree/bindings/display/bridge/renesas,lvds.txt      | 12 ++++++-
> >  1 file changed, 11 insertions(+), 1 deletion(-)
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt index
> > 13af7e2ac7e8..9e3913f6a643 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > @@ -19,7 +19,17 @@ Required properties:
> >    - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS
> >    encoders
> >  
> >  - reg: Base address and length for the memory-mapped registers
> > 
> > -- clocks: A phandle + clock-specifier pair for the functional clock
> > +- clocks: A list of phandles + clock-specifier pairs, one for each entry
> > in
> > +  the clock-names property.
> > +- clock-names: Name of the clocks. This property is model-dependent.
> > +  - The functional clock is mandatory for all models, shall be listed
> > first,
> 
> I would write
> 
> The functional clock, which is mandatory for all models, shall be listed
> first and shall be named "fck".

I'll change that.

> > +    and shall be named "fck".
> > +  - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or
> > +    DU_DOTCLKINx clocks. Those clocks are optional. When supplied they
> > must be
> > +    named "extal" and "dclkin.x" respectively, with "x" being the
> > DU_DOTCLKIN
> > +    numerical index.
> 
> Is it valid to list other clocks here for the other SoCs?

No, those clocks only exist for D3 and E3, as stated (R8A77990 and R8A77995). 
Do you think the text isn't clear enough ?

> > +  - When the clocks property only contains the functional clock, the
> > +    clock-names property may be omitted.
> > 
> >  - resets: A phandle + reset specifier for the module reset
> 
> Thanks
>    j
> 
> >  Required nodes:

-- 
Regards,

Laurent Pinchart






[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux