Hi Jacopo, Thanks for your work. On 2018-08-24 12:24:19 +0200, Jacopo Mondi wrote: > Add support for D3 Draak board. > > Draak has its HDMI input connected to an ADV7612 which connects to VIN4 > parallel data inputs. > > Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx> > --- > scripts/boards.sh | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/scripts/boards.sh b/scripts/boards.sh > index 26fdab9..7eb3a27 100644 > --- a/scripts/boards.sh > +++ b/scripts/boards.sh > @@ -29,6 +29,13 @@ case $info in > # for V3M, but results in an image. > parallelformat="YUYV8_1X16" > ;; > + "Renesas Draak board based on r8a77995") > + gen="gen3" > + vins="4" > + parallelname="adv7612 0-004c" > + # FIXME: This is a hackfor D3, but results in an image. > + parallelformat="YUYV8_1X16" > + ;; > "Koelsch") > gen="gen2" > > @@ -70,6 +77,8 @@ if [[ "$gen" == "gen3" ]]; then > > txaname="adv748x 0-0070 txa" > txbname="adv748x 0-0070 txb" > + elif [[ "$info" == "Renesas Draak board based on r8a77995" ]]; then > + hdminame="adv7612 0-004c" I don't have the D3 schematics at hand but this feels wrong. Why do you define the adv7612 as both a parallel and CSI-2 source? IIRC the D3 have no CSI-2 IP? The reason this exists for V3M is that it has both parallel input in the form of a adv7612 and a CSI-2 input in the for of a adv7482 connected to the CSI40 IP. > else > cvbsname="adv748x 4-0070 afe" > hdminame="adv748x 4-0070 hdmi" > -- > 2.7.4 > -- Regards, Niklas Söderlund