Hi Yamada-san,
> Add UniPhier SD/eMMC controller support.
>
> As a preparation, I changed tmio_mmc_set_clock() to a platform hook.
> The clock rate setting is platform-specific, and UniPhier variants
> will add another way. I thought it would be better to split this
> to a hook to avoid a mess.
Thanks for this series! I see you did not base it on the renaming
patches. I think is a good decision because it would be a complicated
dependency. I had a glimpse on the patches and the new hook looks good
to me. I want to do full review and testing within the next two weeks.
Then, I can also comment about re-implementing the internal DMA core
handling vs. factorizing it out. It may be fine this way, I simply can't
tell now.
Regards,
Wolfram
>
>
>
> Masahiro Yamada (7):
> mmc: tmio: replace tmio_mmc_clk_stop() calls with tmio_mmc_set_clock()
> mmc: tmio: move tmio_mmc_set_clock() to platform hook
> dt-bindings: mmc: add DT binding for UniPhier SD/eMMC controller
> mmc: uniphier-sd: add UniPhier SD/eMMC controller driver
> mmc: renesas_sdhi: merge clk_{start,stop} functions to set_clock
> mmc: renesas_sdhi: refactor CLK_CTL bit calculation
> mmc: tmio: refactor CLK_CTL bit calculation
>
> .../devicetree/bindings/mmc/uniphier-sd.txt | 60 ++
> MAINTAINERS | 1 +
> drivers/mmc/host/Kconfig | 10 +
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/renesas_sdhi_core.c | 40 +-
> drivers/mmc/host/tmio_mmc.c | 56 ++
> drivers/mmc/host/tmio_mmc.h | 4 +-
> drivers/mmc/host/tmio_mmc_core.c | 79 +--
> drivers/mmc/host/uniphier-sd.c | 694 +++++++++++++++++++++
> 9 files changed, 869 insertions(+), 76 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/uniphier-sd.txt
> create mode 100644 drivers/mmc/host/uniphier-sd.c
>
> --
> 2.7.4
>
