On 07/23/2018 11:26 PM, Wolfram Sang wrote:
And don't reimplement in the driver.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Only build tested.
drivers/i2c/busses/i2c-designware-master.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
I tested this with patch 1 and I like it since with these patches the
test is done before firing up the HW, waiting for an interrupt and then
see the length is invalid for us.
i2ctransfer -f 8 r0@0x10
Before (with i2c_designware debugging on):
[ 15.607283] i2c_designware i2c_designware.1: i2c_dw_xfer: msgs: 1
[ 15.711988] i2c_designware i2c_designware.1: enabled=0x1 stat=0x10
[ 15.712002] i2c_designware i2c_designware.1: i2c_dw_xfer_msg: invalid
message length
Error: Sending messages failed: Invalid argument
After:
[ 25.838661] i2c i2c-8: adapter quirk: no zero length (addr 0x0010,
size 0, read)
Error: Sending messages failed: Operation not supported
Tested-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
