From: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Calculate the top and bottom fields for the interlaced frames and
utilise the extended display list command feature to implement the
auto-field operations. This allows the DU to update the VSP2 registers
dynamically based upon the currently processing field.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
---
v2:
- fix erroneous BIT value which enabled interlaced
- fix field handling at frame_end interrupt
v3:
- Pass DL through partition calls to allow autocmd's to be retrieved
- Document interlaced field in struct vsp1_du_atomic_config
v5:
- Obtain autofld cmd in vsp1_rpf_configure_autofld()
- Move VSP1_DL_EXT_AUTOFLD_INT to vsp1_regs.h
- Rename VSP1_DL_EXT_AUTOFLD_INT -> VI6_DL_EXT_AUTOFLD_INT
- move interlaced configuration parameter to pipe object
- autofld: Set cmd->flags in one single expression.
drivers/media/platform/vsp1/vsp1_dl.c | 10 ++++-
drivers/media/platform/vsp1/vsp1_drm.c | 16 +++++-
drivers/media/platform/vsp1/vsp1_pipe.h | 2 +-
drivers/media/platform/vsp1/vsp1_regs.h | 3 +-
drivers/media/platform/vsp1/vsp1_rpf.c | 72 ++++++++++++++++++++++++--
include/media/vsp1.h | 2 +-
6 files changed, 100 insertions(+), 5 deletions(-)
diff --git a/drivers/media/platform/vsp1/vsp1_dl.c b/drivers/media/platform/vsp1/vsp1_dl.c
index d5b3c24d160c..4963acac73f8 100644
--- a/drivers/media/platform/vsp1/vsp1_dl.c
+++ b/drivers/media/platform/vsp1/vsp1_dl.c
@@ -946,6 +946,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool internal)
*/
unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
{
+ struct vsp1_device *vsp1 = dlm->vsp1;
+ u32 status = vsp1_read(vsp1, VI6_STATUS);
unsigned int flags = 0;
spin_lock(&dlm->lock);
@@ -971,6 +973,14 @@ unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
goto done;
/*
+ * Progressive streams report only TOP fields. If we have a BOTTOM
+ * field, we are interlaced, and expect the frame to complete on the
+ * next frame end interrupt.
+ */
+ if (status & VI6_STATUS_FLD_STD(dlm->index))
+ goto done;
+
+ /*
* The device starts processing the queued display list right after the
* frame end interrupt. The display list thus becomes active.
*/
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index a16856856789..efdc9a676728 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -671,8 +671,20 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
drm_pipe->width = cfg->width;
drm_pipe->height = cfg->height;
- dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u\n",
- __func__, pipe_index, cfg->width, cfg->height);
+ if (cfg->interlaced && !vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) {
+ /*
+ * Interlaced support requires extended display lists to
+ * provide the auto-fld feature with the DU.
+ */
+ dev_dbg(vsp1->dev, "Interlaced unsupported on this pipeline\n");
+ return -EINVAL;
+ }
+
+ pipe->interlaced = cfg->interlaced;
+
+ dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u%s\n",
+ __func__, pipe_index, cfg->width, cfg->height,
+ pipe->interlaced ? "i" : "");
mutex_lock(&vsp1->drm->lock);
diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h b/drivers/media/platform/vsp1/vsp1_pipe.h
index 743d8f0db45c..ae646c9ef337 100644
--- a/drivers/media/platform/vsp1/vsp1_pipe.h
+++ b/drivers/media/platform/vsp1/vsp1_pipe.h
@@ -104,6 +104,7 @@ struct vsp1_partition {
* @entities: list of entities in the pipeline
* @stream_config: cached stream configuration for video pipelines
* @configured: when false the @stream_config shall be written to the hardware
+ * @interlaced: True when the pipeline is configured in interlaced mode
* @partitions: The number of partitions used to process one frame
* @partition: The current partition for configuration to process
* @part_table: The pre-calculated partitions used by the pipeline
@@ -142,6 +143,7 @@ struct vsp1_pipeline {
struct vsp1_dl_body *stream_config;
bool configured;
+ bool interlaced;
unsigned int partitions;
struct vsp1_partition *partition;
diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h
index 5ea9f9070cf3..3738ff2f7b85 100644
--- a/drivers/media/platform/vsp1/vsp1_regs.h
+++ b/drivers/media/platform/vsp1/vsp1_regs.h
@@ -28,6 +28,7 @@
#define VI6_SRESET_SRTS(n) (1 << (n))
#define VI6_STATUS 0x0038
+#define VI6_STATUS_FLD_STD(n) (1 << ((n) + 28))
#define VI6_STATUS_SYS_ACT(n) (1 << ((n) + 8))
#define VI6_WPF_IRQ_ENB(n) (0x0048 + (n) * 12)
@@ -80,6 +81,8 @@
#define VI6_DL_EXT_CTRL_EXPRI (1 << 4)
#define VI6_DL_EXT_CTRL_EXT (1 << 0)
+#define VI6_DL_EXT_AUTOFLD_INT BIT(0)
+
#define VI6_DL_BODY_SIZE 0x0120
#define VI6_DL_BODY_SIZE_UPD (1 << 24)
#define VI6_DL_BODY_SIZE_BS_MASK (0x1ffff << 0)
diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c b/drivers/media/platform/vsp1/vsp1_rpf.c
index 69e5fe6e6b50..c728c193e09c 100644
--- a/drivers/media/platform/vsp1/vsp1_rpf.c
+++ b/drivers/media/platform/vsp1/vsp1_rpf.c
@@ -20,6 +20,18 @@
#define RPF_MAX_WIDTH 8190
#define RPF_MAX_HEIGHT 8190
+/* Pre extended display list command data structure. */
+struct vsp1_extcmd_auto_fld_body {
+ u32 top_y0;
+ u32 bottom_y0;
+ u32 top_c0;
+ u32 bottom_c0;
+ u32 top_c1;
+ u32 bottom_c1;
+ u32 reserved0;
+ u32 reserved1;
+};
+
/* -----------------------------------------------------------------------------
* Device Access
*/
@@ -64,6 +76,14 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
pstride |= format->plane_fmt[1].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
+ /*
+ * pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole
+ * of pstride by 2 is conveniently OK here as we are multiplying both
+ * values.
+ */
+ if (pipe->interlaced)
+ pstride *= 2;
+
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride);
/* Format */
@@ -100,6 +120,9 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
top = compose->top;
}
+ if (pipe->interlaced)
+ top /= 2;
+
vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC,
(left << VI6_RPF_LOC_HCOORD_SHIFT) |
(top << VI6_RPF_LOC_VCOORD_SHIFT));
@@ -169,6 +192,36 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
}
+static void vsp1_rpf_configure_autofld(struct vsp1_rwpf *rpf,
+ struct vsp1_dl_list *dl)
+{
+ const struct v4l2_pix_format_mplane *format = &rpf->format;
+ struct vsp1_dl_ext_cmd *cmd;
+ struct vsp1_extcmd_auto_fld_body *auto_fld;
+ u32 offset_y, offset_c;
+
+ cmd = vsp1_dl_get_pre_cmd(dl);
+ if (WARN_ONCE(!cmd, "Failed to obtain an autofld cmd"))
+ return;
+
+ /* Re-index our auto_fld to match the current RPF. */
+ auto_fld = cmd->data;
+ auto_fld = &auto_fld[rpf->entity.index];
+
+ auto_fld->top_y0 = rpf->mem.addr[0];
+ auto_fld->top_c0 = rpf->mem.addr[1];
+ auto_fld->top_c1 = rpf->mem.addr[2];
+
+ offset_y = format->plane_fmt[0].bytesperline;
+ offset_c = format->plane_fmt[1].bytesperline;
+
+ auto_fld->bottom_y0 = rpf->mem.addr[0] + offset_y;
+ auto_fld->bottom_c0 = rpf->mem.addr[1] + offset_c;
+ auto_fld->bottom_c1 = rpf->mem.addr[2] + offset_c;
+
+ cmd->flags |= VI6_DL_EXT_AUTOFLD_INT | BIT(16 + rpf->entity.index);
+}
+
static void rpf_configure_frame(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
@@ -221,6 +274,11 @@ static void rpf_configure_partition(struct vsp1_entity *entity,
crop.left += pipe->partition->rpf.left;
}
+ if (pipe->interlaced) {
+ crop.height = round_down(crop.height / 2, fmtinfo->vsub);
+ crop.top = round_down(crop.top / 2, fmtinfo->vsub);
+ }
+
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE,
(crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
(crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
@@ -249,9 +307,17 @@ static void rpf_configure_partition(struct vsp1_entity *entity,
fmtinfo->swap_uv)
swap(mem.addr[1], mem.addr[2]);
- vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
- vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
- vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
+ /*
+ * Interlaced pipelines will use the extended pre-cmd to process
+ * SRCM_ADDR_{Y,C0,C1}
+ */
+ if (pipe->interlaced) {
+ vsp1_rpf_configure_autofld(rpf, dl);
+ } else {
+ vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
+ vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
+ vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
+ }
}
static void rpf_partition(struct vsp1_entity *entity,
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index 678c24de1ac6..3093b9cb9067 100644
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -25,6 +25,7 @@ int vsp1_du_init(struct device *dev);
* struct vsp1_du_lif_config - VSP LIF configuration
* @width: output frame width
* @height: output frame height
+ * @interlaced: true for interlaced pipelines
* @callback: frame completion callback function (optional). When a callback
* is provided, the VSP driver guarantees that it will be called once
* and only once for each vsp1_du_atomic_flush() call.
@@ -33,6 +34,7 @@ int vsp1_du_init(struct device *dev);
struct vsp1_du_lif_config {
unsigned int width;
unsigned int height;
+ bool interlaced;
void (*callback)(void *data, bool completed, u32 crc);
void *callback_data;
--
git-series 0.9.1
