[PATCH 2/2] i2c: designware: Add support for a bus clock

[Phil Edworthy <phil.edworthy@xxxxxxxxxxx>]

The Synopsys I2C Controller has a bus clock, but typically SoCs hide this away.
However, on some SoCs you need to explicity enable the bus clock in order to
access the registers.
Therefore, enable an optional bus clock specified by DT.

Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-designware-common.c  | 14 +++++++++++++-
 drivers/i2c/busses/i2c-designware-core.h    |  1 +
 drivers/i2c/busses/i2c-designware-platdrv.c |  2 ++
 3 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 48914df..4fa67d6 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -186,13 +186,25 @@ unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
 
 int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare)
 {
+	int ret;
+
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
 
-	if (prepare)
+	if (prepare) {
+		/* Optional bus clock */
+		if (!IS_ERR(dev->busclk)) {
+			ret = clk_prepare_enable(dev->busclk);
+			if (ret)
+				return ret;
+		}
+
 		return clk_prepare_enable(dev->clk);
+	}
 
 	clk_disable_unprepare(dev->clk);
+	clk_disable_unprepare(dev->busclk);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(i2c_dw_prepare_clk);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index d690e64..10f905d 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -239,6 +239,7 @@ struct dw_i2c_dev {
 	void __iomem		*base;
 	struct completion	cmd_complete;
 	struct clk		*clk;
+	struct clk		*busclk;
 	struct reset_control	*rst;
 	struct i2c_client		*slave;
 	u32			(*get_clk_rate_khz) (struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5660daf..64389fe 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -332,6 +332,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	else
 		i2c_dw_configure_master(dev);
 
+	/* Optional bus clock */
+	dev->busclk = devm_clk_get(&pdev->dev, "bus");
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (!i2c_dw_prepare_clk(dev, true)) {
 		dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
-- 
2.7.4