[PATCH 1/2] dma: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds a new function rcar_dmac_clear_chcr_de() to simplify
adding pause function later.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 drivers/dma/sh/rcar-dmac.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 279c930..afd8c7b 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -762,18 +762,25 @@ static void rcar_dmac_chcr_de_barrier(struct rcar_dmac_chan *chan)
 	dev_err(chan->chan.device->dev, "CHCR DE check error\n");
 }
 
-static void rcar_dmac_sync_tcr(struct rcar_dmac_chan *chan)
+static void rcar_dmac_clear_chcr_de(struct rcar_dmac_chan *chan)
 {
 	u32 chcr = rcar_dmac_chan_read(chan, RCAR_DMACHCR);
 
-	if (!(chcr & RCAR_DMACHCR_DE))
-		return;
-
 	/* set DE=0 and flush remaining data */
 	rcar_dmac_chan_write(chan, RCAR_DMACHCR, (chcr & ~RCAR_DMACHCR_DE));
 
 	/* make sure all remaining data was flushed */
 	rcar_dmac_chcr_de_barrier(chan);
+}
+
+static void rcar_dmac_sync_tcr(struct rcar_dmac_chan *chan)
+{
+	u32 chcr = rcar_dmac_chan_read(chan, RCAR_DMACHCR);
+
+	if (!(chcr & RCAR_DMACHCR_DE))
+		return;
+
+	rcar_dmac_clear_chcr_de(chan);
 
 	/* back DE */
 	rcar_dmac_chan_write(chan, RCAR_DMACHCR, chcr);
-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux