Re: [PATCH v2] arm64: dts: salvator-x(s): Update I2C ch4 clock to 400kHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Wolfram,

On Wed, Jun 6, 2018 at 3:41 PM, Wolfram Sang <wsa@xxxxxxxxxxxxx> wrote:
>> >  arch/arm64/boot/dts/renesas/salvator-x.dtsi  | 2 ++
>> >  arch/arm64/boot/dts/renesas/salvator-xs.dtsi | 2 ++
>>
>> Any reason this cannot be added to salvator-common.dtsi instead?
>
> It could be. For clarity, I wanted to place this attribute to the
> highest level and not somewhere inbetween.

All other (non-VC5/6) devices on i2c4 currently described in DT are
described in salvator-common.dtsi.
If a board adds a device with a lower frequency limit, it can still override it.

Note that the highest level is r8a779*-salvator-*dts ;-)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux