[PATCH 0/4] arm64: dts: renesas: r8a77990 and ebisu: Enable USB2.0 host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch set is based on renesas-drivers.git /
renesas-drivers-2018-06-05-v4.17 tag.

About dt-bindings of "renesas,usb2-phy-r8a77990", I submitted a patch:
https://patchwork.kernel.org/patch/10449723/

But, the phy-rcar-gen3-usb2 driver works on the board without the bindings
because "renesas,rcar-gen3-usb2-phy" can bind the driver.

Also, for now, I don't try to add/enable USB2.0 peripheral on the board
because the phy driver needs some modifications.

Yoshihiro Shimoda (4):
  arm64: dts: renesas: r8a77990: add usb2_phy device node
  arm64: dts: renesas: r8a77990: add USB2.0 host device nodes
  arm64: dts: renesas: r8a77990: ebisu: enable usb2_phy0
  arm64: dts: renesas: r8a77990: ebisu: enable USB2.0 host

 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 20 ++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi      | 37 ++++++++++++++++++++++++++
 2 files changed, 57 insertions(+)

-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux