Re: [PATCH v3 02/10] mfd: da9063: Use REGMAP_IRQ_REG

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 04 Jun 2018, Marek Vasut wrote:

> On 06/04/2018 02:26 PM, Lee Jones wrote:
> > On Sat, 02 Jun 2018, Marek Vasut wrote:
> > 
> >> Convert the regmap_irq table to use REGMAP_IRQ_REG().
> >>
> >> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> >> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> >> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> >> Cc: Mark Brown <broonie@xxxxxxxxxx>
> >> Cc: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
> >> Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> >> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
> >> ---
> >> V3: New patch
> >> Note: A sed oneliner was used:
> >>       sed -i "/\[DA9063_IRQ_/ {N;N;N;s/\n//g;s/.*\[\(DA9063_IRQ_[^]]\+\)].*reg_offset = \([^,]\+\),.* = \([^,]\+\),.*/\tREGMAP_IRQ_REG(\1, \2, \3),/}" drivers/mfd/da9063-irq.c
> >> ---
> >>  drivers/mfd/da9063-irq.c | 145 ++++++++++-------------------------------------
> >>  1 file changed, 29 insertions(+), 116 deletions(-)
> >>
> >> diff --git a/drivers/mfd/da9063-irq.c b/drivers/mfd/da9063-irq.c
> >> index 207bbfe55449..5b406ecfc14a 100644
> >> --- a/drivers/mfd/da9063-irq.c
> >> +++ b/drivers/mfd/da9063-irq.c
> >> @@ -28,125 +28,38 @@
> >>  
> >>  static const struct regmap_irq da9063_irqs[] = {
> >>  	/* DA9063 event A register */
> >> -	[DA9063_IRQ_ONKEY] = {
> >> -		.reg_offset = DA9063_REG_EVENT_A_OFFSET,
> >> -		.mask = DA9063_M_ONKEY,
> >> -	},
> >> -	[DA9063_IRQ_ALARM] = {
> >> -		.reg_offset = DA9063_REG_EVENT_A_OFFSET,
> >> -		.mask = DA9063_M_ALARM,
> >> -	},
> >> -	[DA9063_IRQ_TICK] = {
> >> -		.reg_offset = DA9063_REG_EVENT_A_OFFSET,
> >> -		.mask = DA9063_M_TICK,
> >> -	},
> >> -	[DA9063_IRQ_ADC_RDY] = {
> >> -		.reg_offset = DA9063_REG_EVENT_A_OFFSET,
> >> -		.mask = DA9063_M_ADC_RDY,
> >> -	},
> >> -	[DA9063_IRQ_SEQ_RDY] = {
> >> -		.reg_offset = DA9063_REG_EVENT_A_OFFSET,
> >> -		.mask = DA9063_M_SEQ_RDY,
> >> -	},
> >> +	REGMAP_IRQ_REG(DA9063_IRQ_ONKEY, DA9063_REG_EVENT_A_OFFSET, DA9063_M_ONKEY),
> >> +	REGMAP_IRQ_REG(DA9063_IRQ_ALARM, DA9063_REG_EVENT_A_OFFSET, DA9063_M_ALARM),
> >> +	REGMAP_IRQ_REG(DA9063_IRQ_TICK, DA9063_REG_EVENT_A_OFFSET, DA9063_M_TICK),
> >> +	REGMAP_IRQ_REG(DA9063_IRQ_ADC_RDY, DA9063_REG_EVENT_A_OFFSET, DA9063_M_ADC_RDY),
> >> +	REGMAP_IRQ_REG(DA9063_IRQ_SEQ_RDY, DA9063_REG_EVENT_A_OFFSET, DA9063_M_SEQ_RDY),
> > 
> > Nice, but I think checkpatch.pl would complain.
> > 
> > Better to break after the first argument I think.
> 
> Doesn't really help the readability, but done.

I don't make the rules. :)

Personally /me is hoping that the 80 char limit is lifted to ~120 soon.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux