Re: [PATCH v3 5/8] media: rcar-vin: Handle data-enable polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

Thanks for your work.

On 2018-05-29 17:05:56 +0200, Jacopo Mondi wrote:
> Handle data-enable signal polarity. If the polarity is not specifically
> requested to be active low, use the active high default.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>

Acked-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

> ---
> v3:
> - use new property to set the CES bit
> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index d2b7002..9145b56 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -123,6 +123,7 @@
>  /* Video n Data Mode Register 2 bits */
>  #define VNDMR2_VPS		(1 << 30)
>  #define VNDMR2_HPS		(1 << 29)
> +#define VNDMR2_CES		(1 << 28)
>  #define VNDMR2_FTEV		(1 << 17)
>  #define VNDMR2_VLV(n)		((n & 0xf) << 12)
> 
> @@ -698,6 +699,10 @@ static int rvin_setup(struct rvin_dev *vin)
>  		/* Vsync Signal Polarity Select */
>  		if (!(vin->parallel->mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
>  			dmr2 |= VNDMR2_VPS;
> +
> +		/* Data Enable Polarity Select */
> +		if (vin->parallel->mbus_flags & V4L2_MBUS_DATA_ENABLE_LOW)
> +			dmr2 |= VNDMR2_CES;
>  	}
> 
>  	/*
> --
> 2.7.4
> 

-- 
Regards,
Niklas Söderlund



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux