On Thu, May 17, 2018 at 12:13:07AM +0200, Niklas Söderlund wrote:
> Hi Jacopo,
>
> Thanks for your work.
>
> On 2018-05-16 18:32:31 +0200, Jacopo Mondi wrote:
> > The 'bus-width' and 'pclk-sample' properties are not parsed by the VIN
> > driver and only confuse users. Remove them in all Gen2 SoC that used
> > them.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/r8a7790-lager.dts | 3 ---
> > arch/arm/boot/dts/r8a7791-koelsch.dts | 3 ---
> > arch/arm/boot/dts/r8a7791-porter.dts | 1 -
> > arch/arm/boot/dts/r8a7793-gose.dts | 3 ---
> > arch/arm/boot/dts/r8a7794-alt.dts | 1 -
> > arch/arm/boot/dts/r8a7794-silk.dts | 1 -
> > 6 files changed, 12 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
> > index 063fdb6..b56b309 100644
> > --- a/arch/arm/boot/dts/r8a7790-lager.dts
> > +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> > @@ -873,10 +873,8 @@
> > port {
> > vin0ep2: endpoint {
> > remote-endpoint = <&adv7612_out>;
> > - bus-width = <24>;
>
> I can't really make up my mind if this is a good thing or not. Device
> tree describes the hardware and not what the drivers make use of. And
> the fact is that this bus is 24 bits wide. So I'm not sure we should
> remove these properties. But I would love to hear what others think
> about this.
IMO, this property should only be present when all the pins are not
connected. And by "all", I mean the minimum of what each end of the
graph can support.
Rob
