On 05/22/2018 02:48 PM, Geert Uytterhoeven wrote:
>> Define the generic R8A77980 part of the GEther device node.
>>
>> Based on the original (and large) patch by Vladimir Barinov.
>>
>> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> With the below addressed:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Thanks!
>> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
>> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
>> @@ -417,6 +417,17 @@
>> dma-channels = <16>;
>> };
>>
>> + gether: ethernet@e7400000 {
>> + compatible = "renesas,gether-r8a77980";
>> + reg = <0 0xe7400000 0 0x1000>;
>> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cpg CPG_MOD 813>;
>> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
>
> resets = <&cpg 813>;
As usual...
>
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>
> Any default phy-mode needed?
A default "phy-mode" IMO make sense when the MAC supports a single
PHY interface mode. In this case, both RMII and RGMII are supported, so
I coulsn't choose a default...
>> + };
>> +
>> mmc0: mmc@ee140000 {
>> compatible = "renesas,sdhi-r8a77980",
>> "renesas,rcar-gen3-sdhi";
>
>
> Gr{oetje,eeting}s,
>
> Geert
>
