Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.
To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:
mtdparts=spi0.0:512k@0(loader),5632k(user),-(flash)
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 21 ---------------------
1 file changed, 21 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 8ab793d8b2fd..406d5d29e29c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -724,27 +724,6 @@
spi-cpha;
spi-cpol;
m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
- partition@80000 {
- label = "user";
- reg = <0x00080000 0x00580000>;
- read-only;
- };
- partition@600000 {
- label = "flash";
- reg = <0x00600000 0x03a00000>;
- };
- };
};
};
--
2.16.2
