From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
According to table 7.3 ("List of Interrupt IDs") in the RZ/A1H Hardware
User's Manual rev. 3.00, the realtime clock interrupts are level not
edge interrupts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r7s72100.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index c7b3dca6d81c..eb2e6f95a2e8 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -682,9 +682,9 @@
rtc: rtc@fcff1000 {
compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
reg = <0xfcff1000 0x2e>;
- interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING
- GIC_SPI 277 IRQ_TYPE_EDGE_RISING
- GIC_SPI 278 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "alarm", "period", "carry";
clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
<&rtc_x3_clk>, <&extal_clk>;
--
2.11.0
