From: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
Enable the HDMI encoder for the M3N Salvator-X board and hook it up to
the HDMI connector.
Based on a similar patches of the the Salvator-X board
on the R8A7796 SoC device tree
by Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
---
.../boot/dts/renesas/r8a77965-salvator-x.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
index a2b8fb20fef8..11e8d43e9e11 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
@@ -31,3 +31,20 @@
clock-names = "du.0", "du.1", "du.3", "lvds.0",
"dclkin.0", "dclkin.1", "dclkin.3";
};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
--
2.17.0
