Hi,
On Tue, Apr 17, 2018 at 12:04:21PM +0100, Michel Pollet wrote:
> The Renesas RZ/N1 Family (Part #R9A06G0xx) needs a small driver
> to reboot the Cortex-A7 cores. This driver is a sub driver of
> the sysctrl MFD.
>
> Signed-off-by: Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>
> ---
> drivers/power/reset/Kconfig | 7 +++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/rzn1-reboot.c | 96 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 104 insertions(+)
> create mode 100644 drivers/power/reset/rzn1-reboot.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index df58fc8..1416d88 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -144,6 +144,13 @@ config POWER_RESET_RESTART
> Instead they restart, and u-boot holds the SoC until the
> user presses a key. u-boot then boots into Linux.
>
> +config POWER_RESET_RZN1
> + bool "Renesas RZ/N1 reboot driver"
> + depends on ARCH_RZN1
> + help
> + This driver allows rebooting the CA7 cores of the
> + Renesas RZ/N1 Family of SoC (Part # R9A06G0xx).
> +
> config POWER_RESET_ST
> bool "ST restart driver"
> depends on ARCH_STI
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 7778c74..bad9702 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
> obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
> obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
> +obj-$(CONFIG_POWER_RESET_RZN1) += rzn1-reboot.o
> obj-$(CONFIG_POWER_RESET_ST) += st-poweroff.o
> obj-$(CONFIG_POWER_RESET_VERSATILE) += arm-versatile-reboot.o
> obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
> diff --git a/drivers/power/reset/rzn1-reboot.c b/drivers/power/reset/rzn1-reboot.c
> new file mode 100644
> index 0000000..43876d5
> --- /dev/null
> +++ b/drivers/power/reset/rzn1-reboot.c
> @@ -0,0 +1,96 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * RZ/N1 reboot driver
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + * Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>, <buserror@xxxxxxxxx>
> + * Derived from zx-reboot.c
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +
> +/* Definitions from the SDK rzn1-sysctrl.h autogenerated file */
> +#define RZN1_SYSCTRL_REG_RSTEN_MRESET_EN 0
> +#define RZN1_SYSCTRL_REG_RSTEN_WDA7RST_EN 1
> +#define RZN1_SYSCTRL_REG_RSTEN_WDA7RST_EN_MASK 0x6
> +#define RZN1_SYSCTRL_REG_RSTEN_WDM3RST_EN 3
> +#define RZN1_SYSCTRL_REG_RSTEN_CM3LOCKUPRST_EN 4
> +#define RZN1_SYSCTRL_REG_RSTEN_CM3SYSRESET_EN 5
> +#define RZN1_SYSCTRL_REG_RSTEN_SWRST_EN 6
> +#define RZN1_SYSCTRL_REG_RSTCTRL_WDA7RST_REQ 1
> +#define RZN1_SYSCTRL_REG_RSTCTRL_WDA7RST_REQ_MASK 0x6
> +#define RZN1_SYSCTRL_REG_RSTCTRL_WDM3RST_REQ 3
> +#define RZN1_SYSCTRL_REG_RSTCTRL_CM3LOCKUPRST_REQ 4
> +#define RZN1_SYSCTRL_REG_RSTCTRL_CM3SYSRESET_REQ 5
> +#define RZN1_SYSCTRL_REG_RSTCTRL_SWRST_REQ 6
> +
> +static void __iomem *reg_rsten, *reg_rstctrl;
Please make this into a proper driver and allocate this dynamically.
You can get device context from the notifier_block, see for example
gpio-restart.
> +static int rzn1_reboot_handler(struct notifier_block *this,
> + unsigned long mode, void *cmd)
> +{
> + writel(readl(reg_rsten) |
> + BIT(RZN1_SYSCTRL_REG_RSTEN_SWRST_EN) |
> + BIT(RZN1_SYSCTRL_REG_RSTEN_MRESET_EN),
> + reg_rsten);
> + writel(readl(reg_rstctrl) |
> + BIT(RZN1_SYSCTRL_REG_RSTCTRL_SWRST_REQ),
> + reg_rstctrl);
> +
> + mdelay(50);
> + pr_emerg("Unable to restart system\n");
> +
> + return NOTIFY_DONE;
> +}
> +
> +static struct notifier_block rzn1_reboot_nb = {
> + .notifier_call = rzn1_reboot_handler,
> + .priority = 128,
> +};
> +
> +static int rzn1_reboot_probe(struct platform_device *ofdev)
> +{
> + int err;
> +
> + reg_rsten = of_iomap(ofdev->dev.of_node, 0);
> + reg_rstctrl = of_iomap(ofdev->dev.of_node, 1);
Please use devm_ioremap().
> +
> + if (!reg_rsten || !reg_rstctrl) {
> + dev_err(&ofdev->dev, "invalid register mapping\n");
> + return -ENODEV;
> + }
> +
> + err = register_restart_handler(&rzn1_reboot_nb);
> + if (err) {
> + dev_err(&ofdev->dev, "register restart handler failed(err=%d)\n",
> + err);
> + }
Missing unregister_restart_handler() in .remove.
> +
> + return err;
> +}
> +
> +static const struct of_device_id rzn1_reboot_of_match[] = {
> + { .compatible = "renesas,rzn1-reboot" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rzn1_reboot_of_match);
> +
> +static struct platform_driver rzn1_reboot_driver = {
> + .probe = rzn1_reboot_probe,
> + .driver = {
> + .name = "rzn1-reboot",
> + .of_match_table = rzn1_reboot_of_match,
> + },
> +};
> +module_platform_driver(rzn1_reboot_driver);
> +
> +MODULE_DESCRIPTION("RZ/N1 reboot driver");
> +MODULE_AUTHOR("Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>, <buserror@xxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
-- Sebastian
Attachment:
signature.asc
Description: PGP signature
