Define the iW-RainboW-G23S board dependent part of the EtherAVB device node. Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx> Reviewed-by: Chris Paterson <chris.paterson2@xxxxxxxxxxx> --- * currently u-boot sets the AVB pin configuration. arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index d21baad..e3585da 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -12,11 +12,12 @@ compatible = "iwave,g23s", "renesas,r8a77470"; aliases { + ethernet0 = &avb; serial1 = &scif1; }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial1:115200n8"; }; @@ -26,6 +27,18 @@ }; }; +&avb { + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + micrel,led-mode = <1>; + }; +}; + &extal_clk { clock-frequency = <20000000>; }; -- 2.7.4