Hello, I have rebased the Eagle display enablement on top of (part of) Sergei's series: [PATCH v2 0/5] Add R8A77970/V3MSK LVDS/HDMI support Simon: you can skip "[1/5] arm64: dts: renesas: r8a77970: add FCPVD support" as you already collected that Sergei: I re-sent your series because there was an additional comment from Laurent on [3/5]. I felt it was wrong to send a follow up patch on a series still not collected by Simon, so I've resent it. Hope this time is ok with you. Also, please note that [5/5] of your original series shall be re-sent using the newly introduced (still in-review) LVDS decoder. Please see [5/5] of this series as an example. Niklas: [5/5] of this series is a fixup of your patches and mine. I added your signed-off-by, hope it is ok. The series depends on THC63LVD1024 driver, currently submitted for inclusion "[PATCH v8 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge" currently available at: git://jmondi.org/linux lvds-bridge/linus-master/v8 Thanks j v2 -> v3: - Use Sergei's series for patches [1-4] with a minor comment from Laurent - Remove the lvds-decoder node label and add Laurent's Reviewed-by in [5/5] v1 -> v2: - Add Laurent's reviewed by tags - Fixup patch 5, 6 and 7 of v1 - Remove DU digital output pin muxing - Update thc63lvd1024 to use the new bindings with mandatory power supply - Minor fixes (changes are described individually in each patch) Jacopo Mondi (1): arm64: dts: renesas: eagle: Enable HDMI output Sergei Shtylyov (4): arm64: dts: renesas: r8a77970: add FCPVD support arm64: dts: renesas: r8a77970: add VSPD support arm64: dts: renesas: r8a77970: add DU support arm64: dts: renesas: r8a77970: add LVDS support arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 93 ++++++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77970.dtsi | 75 +++++++++++++++++++++ 2 files changed, 168 insertions(+) -- 2.7.4
