Hi Simon, On Monday, 9 April 2018 14:17:15 EEST Simon Horman wrote: > On Fri, Apr 06, 2018 at 10:14:35PM +0300, Laurent Pinchart wrote: > > Hello, > > > > This patch series fixes LVDS output support on the Lager, Koelsh, Porter > > and Gose boards that broke in v4.17-rc1 due to the combination of the > > R-Car DU LVDS driver rework and the DT move of all on-SoC peripherals to > > a /soc node. > > > > We could handle the problem in the R-Car DU LVDS DT backward compatibility > > code, but that fix would only be used for v4.17 as in v4.18 the Gen2 DT > > will move to the new LVDS DT bindings. I thus propose merging these three > > patches in v4.17 already to fix the problem as this is the simplest > > solution. > > > > The patches are based on top of Linus' master that includes both the R-Car > > DU changes and the ARM DT changes for v4.17-rc1. I can rebase them on top > > of v4.17-rc1 when it will be released, but I don't expect any change. > > Thanks, I think this should be fine. Please ping me once v4.17-rc1 has > been released. I'll send a v6 on top of v4.17-rc1 to fix the issue pointed out by Niklas in patch 2/3. > > Laurent Pinchart (3): > > ARM: dts: r8a7790: Convert to new LVDS DT bindings > > ARM: dts: r8a7791: Convert to new LVDS DT bindings > > ARM: dts: r8a7793: Convert to new LVDS DT bindings > > > > arch/arm/boot/dts/r8a7790-lager.dts | 22 +++++++++--- > > arch/arm/boot/dts/r8a7790.dtsi | 65 +++++++++++++++++++++++++----- > > arch/arm/boot/dts/r8a7791-koelsch.dts | 10 ++++-- > > arch/arm/boot/dts/r8a7791-porter.dts | 16 +++++++-- > > arch/arm/boot/dts/r8a7791.dtsi | 36 +++++++++++++++---- > > arch/arm/boot/dts/r8a7793-gose.dts | 10 ++++-- > > arch/arm/boot/dts/r8a7793.dtsi | 37 ++++++++++++++++---- > > 7 files changed, 163 insertions(+), 33 deletions(-) -- Regards, Laurent Pinchart
