Hi Jacopo,
Thank you for the patch.
On Friday, 6 April 2018 15:41:57 EEST Jacopo Mondi wrote:
> Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
> output converter.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/Kconfig | 6 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/thc63lvd1024.c | 212 +++++++++++++++++++++++++++++++
> 3 files changed, 219 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 3aa65bd..42c9c2d 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -93,6 +93,12 @@ config DRM_SII9234
> It is an I2C driver, that detects connection of MHL bridge
> and starts encapsulation of HDMI signal.
>
> +config DRM_THINE_THC63LVD1024
> + tristate "Thine THC63LVD1024 LVDS decoder bridge"
> + depends on OF
> + ---help---
> + Thine THC63LVD1024 LVDS/parallel converter driver.
> +
> config DRM_TOSHIBA_TC358767
> tristate "Toshiba TC358767 eDP bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile
> b/drivers/gpu/drm/bridge/Makefile index 373eb28..fd90b16 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
> obj-$(CONFIG_DRM_SII902X) += sii902x.o
> obj-$(CONFIG_DRM_SII9234) += sii9234.o
> +obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
> obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
> obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
> diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c
> b/drivers/gpu/drm/bridge/thc63lvd1024.c new file mode 100644
> index 0000000..c8fad9c
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
> @@ -0,0 +1,212 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * THC63LVD1024 LVDS to parallel data DRM bridge driver.
> + *
> + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
You should include slab.h as you're using devm_kzalloc().
> +
> +enum thc63_ports {
> + THC63_LVDS_IN0,
> + THC63_LVDS_IN1,
> + THC63_RGB_OUT0,
> + THC63_RGB_OUT1,
> +};
> +
> +struct thc63_dev {
> + struct device *dev;
> +
> + struct regulator *vcc;
> +
> + struct gpio_desc *pdwn;
pwdn ?
> + struct gpio_desc *oe;
> +
> + struct drm_bridge bridge;
> + struct drm_bridge *next;
> +};
> +
> +static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct thc63_dev, bridge);
> +}
> +
> +static int thc63_attach(struct drm_bridge *bridge)
> +{
> + struct thc63_dev *thc63 = to_thc63(bridge);
> +
> + return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
> +}
> +
> +static void thc63_enable(struct drm_bridge *bridge)
> +{
> + struct thc63_dev *thc63 = to_thc63(bridge);
> + int ret;
> +
> + ret = regulator_enable(thc63->vcc);
> + if (ret) {
> + dev_err(thc63->dev,
> + "Failed to enable regulator \"vcc\": %d\n", ret);
> + return;
> + }
> +
> + if (thc63->pdwn)
> + gpiod_set_value(thc63->pdwn, 0);
> +
> + if (thc63->oe)
> + gpiod_set_value(thc63->oe, 1);
You don't need to check the gpio_desc pointers first, gpiod_set_value() is a
no-op if the pointer is NULL.
> +}
> +
> +static void thc63_disable(struct drm_bridge *bridge)
> +{
> + struct thc63_dev *thc63 = to_thc63(bridge);
> + int ret;
> +
> + if (thc63->oe)
> + gpiod_set_value(thc63->oe, 0);
> +
> + if (thc63->pdwn)
> + gpiod_set_value(thc63->pdwn, 1);
Same here.
> + ret = regulator_disable(thc63->vcc);
> + if (ret)
> + dev_err(thc63->dev,
> + "Failed to disable regulator \"vcc\": %d\n", ret);
> +}
> +
> +static const struct drm_bridge_funcs thc63_bridge_func = {
> + .attach = thc63_attach,
> + .enable = thc63_enable,
> + .disable = thc63_disable,
> +};
> +
> +static int thc63_parse_dt(struct thc63_dev *thc63)
> +{
> + struct device_node *thc63_out;
> + struct device_node *remote;
> +
> + thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
> + THC63_RGB_OUT0, -1);
> + if (!thc63_out) {
> + dev_err(thc63->dev, "Missing endpoint in port@%u\n",
> + THC63_RGB_OUT0);
> + return -ENODEV;
> + }
> +
> + remote = of_graph_get_remote_port_parent(thc63_out);
> + of_node_put(thc63_out);
> + if (!remote) {
> + dev_err(thc63->dev, "Endpoint in port@%u unconnected\n",
> + THC63_RGB_OUT0);
> + return -ENODEV;
> + }
> +
> + if (!of_device_is_available(remote)) {
> + dev_err(thc63->dev, "port@%u remote endpoint is disabled\n",
> + THC63_RGB_OUT0);
> + of_node_put(remote);
> + return -ENODEV;
> + }
> +
> + thc63->next = of_drm_find_bridge(remote);
> + if (!thc63->next) {
> + of_node_put(remote);
> + return -EPROBE_DEFER;
> + }
> +
> + return 0;
> +}
> +
> +static int thc63_gpio_init(struct thc63_dev *thc63)
> +{
> + thc63->oe = devm_gpiod_get_optional(thc63->dev, "enable", GPIOD_OUT_LOW);
If you agree with my comment regarding the DT bindings, this should be "oe".
> + if (IS_ERR(thc63->oe)) {
> + dev_err(thc63->dev, "Unable to get \"enable-gpios\": %ld\n",
> + PTR_ERR(thc63->oe));
And the message should be update here too.
With those small issues fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> + return PTR_ERR(thc63->oe);
> + }
> +
> + thc63->pdwn = devm_gpiod_get_optional(thc63->dev, "powerdown",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(thc63->pdwn)) {
> + dev_err(thc63->dev, "Unable to get \"powerdown-gpios\": %ld\n",
> + PTR_ERR(thc63->pdwn));
> + return PTR_ERR(thc63->pdwn);
> + }
> +
> + return 0;
> +}
> +
> +static int thc63_probe(struct platform_device *pdev)
> +{
> + struct thc63_dev *thc63;
> + int ret;
> +
> + thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL);
> + if (!thc63)
> + return -ENOMEM;
> +
> + thc63->dev = &pdev->dev;
> + platform_set_drvdata(pdev, thc63);
> +
> + thc63->vcc = devm_regulator_get(thc63->dev, "vcc");
> + if (IS_ERR(thc63->vcc)) {
> + if (PTR_ERR(thc63->vcc) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + dev_err(thc63->dev, "Unable to get \"vcc\" supply: %ld\n",
> + PTR_ERR(thc63->vcc));
> + return PTR_ERR(thc63->vcc);
> + }
> +
> + ret = thc63_gpio_init(thc63);
> + if (ret)
> + return ret;
> +
> + ret = thc63_parse_dt(thc63);
> + if (ret)
> + return ret;
> +
> + thc63->bridge.driver_private = thc63;
> + thc63->bridge.of_node = pdev->dev.of_node;
> + thc63->bridge.funcs = &thc63_bridge_func;
> +
> + drm_bridge_add(&thc63->bridge);
> +
> + return 0;
> +}
> +
> +static int thc63_remove(struct platform_device *pdev)
> +{
> + struct thc63_dev *thc63 = platform_get_drvdata(pdev);
> +
> + drm_bridge_remove(&thc63->bridge);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id thc63_match[] = {
> + { .compatible = "thine,thc63lvd1024", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, thc63_match);
> +
> +static struct platform_driver thc63_driver = {
> + .probe = thc63_probe,
> + .remove = thc63_remove,
> + .driver = {
> + .name = "thc63lvd1024",
> + .of_match_table = thc63_match,
> + },
> +};
> +module_platform_driver(thc63_driver);
> +
> +MODULE_AUTHOR("Jacopo Mondi <jacopo@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver");
> +MODULE_LICENSE("GPL v2");
--
Regards,
Laurent Pinchart
