Re: [PATCH v13 27/33] rcar-vin: add chsel information to rvin_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Niklas,

Thank you for the patch.

On Tuesday, 27 March 2018 00:44:50 EEST Niklas Söderlund wrote:
> Each Gen3 SoC has a limited set of predefined routing possibilities for
> which CSI-2 device and channel can be routed to which VIN instance.
> Prepare to store this information in the struct rvin_info.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
> 
> * Changes since v11
> - Fixed spelling.
> - Reorderd filed order in struct rvin_group_route.
> - Renamed chan to channel in struct rvin_group_route.
> ---
>  drivers/media/platform/rcar-vin/rcar-vin.h | 42 +++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h
> b/drivers/media/platform/rcar-vin/rcar-vin.h index
> cf5c467d45e10847..93eb40856b866117 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -43,6 +43,14 @@ enum model_id {
>  	RCAR_GEN3,
>  };
> 
> +enum rvin_csi_id {
> +	RVIN_CSI20,
> +	RVIN_CSI21,
> +	RVIN_CSI40,
> +	RVIN_CSI41,
> +	RVIN_CSI_MAX,
> +};
> +
>  /**
>   * STOPPED  - No operation in progress
>   * RUNNING  - Operation in progress have buffers
> @@ -79,12 +87,45 @@ struct rvin_graph_entity {
>  	unsigned int sink_pad;
>  };
> 
> +/**
> + * struct rvin_group_route - describes a route from a channel of a
> + *	CSI-2 receiver to a VIN
> + *
> + * @csi:	CSI-2 receiver ID.
> + * @channel:	Output channel of the CSI-2 receiver.
> + * @vin:	VIN ID.
> + * @mask:	Bitmask of the different CHSEL register values that
> + *		allow for a route from @csi + @chan to @vin.
> + *
> + * .. note::
> + *	Each R-Car CSI-2 receiver has four output channels facing the VIN
> + *	devices, each channel can carry one CSI-2 Virtual Channel (VC).
> + *	There is no correlation between channel number and CSI-2 VC. It's
> + *	up to the CSI-2 receiver driver to configure which VC is output
> + *	on which channel, the VIN devices only care about output channels.
> + *
> + *	There are in some cases multiple CHSEL register settings which would
> + *	allow for the same route from @csi + @channel to @vin. For example
> + *	on R-Car H3 both the CHSEL values 0 and 3 allow for a route from
> + *	CSI40/VC0 to VIN0. All possible CHSEL values for a route need to be
> + *	recorded as a bitmask in @mask, in this example bit 0 and 3 should
> + *	be set.
> + */
> +struct rvin_group_route {
> +	enum rvin_csi_id csi;
> +	unsigned int channel;
> +	unsigned int vin;
> +	unsigned int mask;
> +};
> +
>  /**
>   * struct rvin_info - Information about the particular VIN implementation
>   * @model:		VIN model
>   * @use_mc:		use media controller instead of controlling subdevice
>   * @max_width:		max input width the VIN supports
>   * @max_height:		max input height the VIN supports
> + * @routes:		list of possible routes from the CSI-2 recivers to
> + *			all VINs. The list mush be NULL terminated.
>   */
>  struct rvin_info {
>  	enum model_id model;
> @@ -92,6 +133,7 @@ struct rvin_info {
> 
>  	unsigned int max_width;
>  	unsigned int max_height;
> +	const struct rvin_group_route *routes;
>  };
> 
>  /**


-- 
Regards,

Laurent Pinchart







[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux