Re: [PATCH/RFT v2 0/3] thermal: add support for r8a77995

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Simon-san,

2018-03-30 22:49 GMT+09:00 Simon Horman <horms@xxxxxxxxxxxx>:
> On Fri, Mar 30, 2018 at 12:13:00PM +0900, Yoshihiro Kaneko wrote:
>> This series adds thermal support for r8a77995.
>> R-Car D3 (r8a77995) have a thermal sensor module which is similar to Gen2.
>> Therefore this series adds r8a77995 support to rcar_thermal driver not
>> rcar_gen3_thermal driver.
>>
>> This series is based on the next branch of Zhang Rui's linux tree.
>
> I have very lightly tested this as follows after enabling
> CONFIG_RCAR_THERMAL in the kernel .config.
>
> # cat /sys/devices/virtual/thermal/thermal_zone0/temp
> 40000

Thanks for the testing.
Probably 40C is reasonable, is not?


Best regards,
Kaneko



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux