Re: [PATCH v3 7/8] DT: arm: Add Renesas RZN1D-DB Board base file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 29, 2018 at 08:47:03AM +0100, Michel Pollet wrote:
> This adds a base device tree file for the RZN1-DB board, with only the
> basic support allowing the system to boot to a prompt. Only one UART is
> used, with only a single CPU running.
> 
> Signed-off-by: Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> 
> diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> new file mode 100644
> index 0000000..a462b1a
> --- /dev/null
> +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the RZN1D-DB Board
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "r9a06g0xx.dtsi"
> +
> +/ {
> +	model = "RZN1D-DB Board";
> +	compatible = "renesas,rzn1d400-db", "renesas,r9a06g032", "renesas,rzn1";
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +};
> +&uart0 {
> +	status = "okay";
> +};

Please add a blank line between nodes.
Please use "ARM: dts: " as the patch prefix.



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux