[PATCH v2 1/2] pwm: rcar: Use PM Runtime to control module clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hien Dang <hien.dang.eb@xxxxxxxxxxx>

Runtime PM API (pm_runtime_get_sync/pm_runtime_put) should be used
to control module clock instead of clk_prepare_enable and
clk_disable_unprepare.

Signed-off-by: Hien Dang <hien.dang.eb@xxxxxxxxxxx>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/pwm/pwm-rcar.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rcar.c
index 1c85ecc..b942010 100644
--- a/drivers/pwm/pwm-rcar.c
+++ b/drivers/pwm/pwm-rcar.c
@@ -134,16 +134,12 @@ static int rcar_pwm_set_counter(struct rcar_pwm_chip *rp, int div, int duty_ns,
 
 static int rcar_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
-
-	return clk_prepare_enable(rp->clk);
+	return pm_runtime_get_sync(chip->dev);
 }
 
 static void rcar_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
-
-	clk_disable_unprepare(rp->clk);
+	pm_runtime_put(chip->dev);
 }
 
 static int rcar_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux