On other Renesas SoCs, the pin group for the MDIO bus is named "mdio"
instead of "mdc". Fix the inconsistency, now the pinctrl drivers for
R-Car H3, M3-W, and M3-N have gained support for the traditional pin
group name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
This depends on:
- pinctrl: sh-pfc: r8a7795-es1: Rename EtherAVB "mdc" pin group to "mdio"
- pinctrl: sh-pfc: r8a7795: Rename EtherAVB "mdc" pin group to "mdio"
- pinctrl: sh-pfc: r8a7796: Rename EtherAVB "mdc" pin group to "mdio"
---
arch/arm64/boot/dts/renesas/ulcb.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 6f814845f8b665f3..93402783d52f0927 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -255,12 +255,12 @@
avb_pins: avb {
mux {
- groups = "avb_link", "avb_mdc", "avb_mii";
+ groups = "avb_link", "avb_mdio", "avb_mii";
function = "avb";
};
- pins_mdc {
- groups = "avb_mdc";
+ pins_mdio {
+ groups = "avb_mdio";
drive-strength = <24>;
};
--
2.7.4
