Hi Simon, Thanks for your work. I tested these patches together with the dependencies of the topic/rcar-gen3-cpufreq-v4 branch, feel free to add to all patches in this series. Tested-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> On 2018-01-03 13:41:02 +0100, Simon Horman wrote: > These are dependencies for supporting CPUFreq. The remainder of that > work is being posted separately and can be found at: > > https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git topic/rcar-gen3-cpufreq-v4 > > > Patch 1: Cleanup of DTS, only related as its an apply-time conflict > Patches 2 & 3: Add OPPs > > Changes since v2: > * Preserve alphabetical order of sub-nodes of root node > * Do not provide unit name for opps, they have no base address > * Describe clock dependency for all CPU cores > > Changes since v1: > * Only provide one operating points node for each operating-points-v2 node > as per the binding; other nodes were unused and have been removed > > A description of steps taken to lightly exercise the same feature for the > r8a7795 the above can be found at the link below. The results are the same > for the r8a7796 with the exception that it has two active CPU cores rather > than four. > > http://elinux.org/Tests:R-CAR-GEN3-CPUFreq > > > Dien Pham (2): > arm64: dts: renesas: r8a7795: Add OPPs table for cpu devices > arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices > > Simon Horman (1): > arm64: dts: renesas: r8a7795: move scif node into alphabetical order > > arch/arm64/boot/dts/renesas/r8a7795.dtsi | 71 +++++++++++++++++++++++++++++--- > arch/arm64/boot/dts/renesas/r8a7796.dtsi | 62 ++++++++++++++++++++++++++++ > 2 files changed, 128 insertions(+), 5 deletions(-) > > -- > 2.11.0 > -- Regards, Niklas Söderlund
