Hi Laurent,
Thanks for your comments.
On 2017-12-08 11:52:01 +0200, Laurent Pinchart wrote:
> Hi Niklas,
>
> Thank you for the patch.
>
> On Friday, 8 December 2017 03:08:30 EET Niklas Söderlund wrote:
> > On Gen3 the CSI-2 routing is controlled by the VnCSI_IFMD register. One
> > feature of this register is that it's only present in the VIN0 and VIN4
> > instances. The register in VIN0 controls the routing for VIN0-3 and the
> > register in VIN4 controls routing for VIN4-7.
> >
> > To be able to control routing from a media device this function is need
> > to control runtime PM for the subgroup master (VIN0 and VIN4). The
> > subgroup master must be switched on before the register is manipulated,
> > once the operation is complete it's safe to switch the master off and
> > the new routing will still be in effect.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> > Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> > ---
> > drivers/media/platform/rcar-vin/rcar-dma.c | 25 +++++++++++++++++++++++++
> > drivers/media/platform/rcar-vin/rcar-vin.h | 2 ++
> > 2 files changed, 27 insertions(+)
> >
> > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c
> > b/drivers/media/platform/rcar-vin/rcar-dma.c index
> > ace95d5b543a17e3..d2788d8bb9565aaa 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> > @@ -16,6 +16,7 @@
> >
> > #include <linux/delay.h>
> > #include <linux/interrupt.h>
> > +#include <linux/pm_runtime.h>
> >
> > #include <media/videobuf2-dma-contig.h>
> >
> > @@ -1228,3 +1229,27 @@ int rvin_dma_register(struct rvin_dev *vin, int irq)
> >
> > return ret;
> > }
> > +
> > +/* ------------------------------------------------------------------------
> > + * Gen3 CHSEL manipulation
> > + */
> > +
> > +void rvin_set_chsel(struct rvin_dev *vin, u8 chsel)
>
> How about naming the function a bit more explicitly,
> rvin_set_channel_routing() for instance ?
I agree, it's a much better name.
>
> > +{
> > + u32 ifmd, vnmc;
> > +
> > + pm_runtime_get_sync(vin->dev);
>
> Shouldn't you check the return value of this function ?
Sakari asked the same thing in v4 :-)
In short no its not needed please see Geert's response [1]. If I recall
correctly this was also discussed in more detail in another thread for
some other driver whit a bit longer answer saying that it
pm_runtime_get_sync() fails you have big problems but I can't find that
thread now :-(
1. https://www.spinics.net/lists/linux-media/msg115241.html
>
> > +
> > + /* Make register writes take effect immediately */
> > + vnmc = rvin_read(vin, VNMC_REG) & ~VNMC_VUP;
> > + rvin_write(vin, vnmc, VNMC_REG);
>
> Shouldn't you restore the original value of VNMC at the end of the function ?
> What if this races with device access local to the VIN0 or VIN4 instance ?
Media link changes are not allowed when any VIN in the group are
streaming so this should not be an issue. But I agree it's good form to
restore the value anyhow so I will update this for the next version.
>
> > + ifmd = VNCSI_IFMD_DES2 | VNCSI_IFMD_DES1 | VNCSI_IFMD_DES0 |
> > + VNCSI_IFMD_CSI_CHSEL(chsel);
> > +
> > + rvin_write(vin, ifmd, VNCSI_IFMD_REG);
> > +
> > + vin_dbg(vin, "Set IFMD 0x%x\n", ifmd);
> > +
> > + pm_runtime_put(vin->dev);
> > +}
> > diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h
> > b/drivers/media/platform/rcar-vin/rcar-vin.h index
> > a440effe4b86af31..7819c760c2c13422 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> > +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> > @@ -163,4 +163,6 @@ void rvin_v4l2_unregister(struct rvin_dev *vin);
> >
> > const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
> >
> > +void rvin_set_chsel(struct rvin_dev *vin, u8 chsel);
> > +
> > #endif
>
> --
> Regards,
>
> Laurent Pinchart
>
--
Regards,
Niklas Söderlund
