Re: [PATCH 2/9] v4l: vsp1: Print the correct blending unit name in debug messages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On 03/12/17 10:57, Laurent Pinchart wrote:
> The DRM pipelines can use either the BRU or the BRS for blending. Make
> sure the right name is used in debugging messages to avoid confusion.

This could likely tag along with the preceding [PATCH 1/9] on it's short cut to
mainline before the rest of the CRC series is reviewed.

> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

> ---
>  drivers/media/platform/vsp1/vsp1_drm.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> index ac85942162c1..0fe541084f5c 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -400,8 +400,11 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
>  	struct v4l2_subdev_selection sel;
>  	struct v4l2_subdev_format format;
>  	const struct v4l2_rect *crop;
> +	const char *bru_name;
>  	int ret;
>  
> +	bru_name = pipe->bru->type == VSP1_ENTITY_BRU ? "BRU" : "BRS";
> +
>  	/*
>  	 * Configure the format on the RPF sink pad and propagate it up to the
>  	 * BRU sink pad.
> @@ -473,9 +476,9 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
>  	if (ret < 0)
>  		return ret;
>  
> -	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
> +	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
>  		__func__, format.format.width, format.format.height,
> -		format.format.code, format.pad);
> +		format.format.code, bru_name, format.pad);
>  
>  	sel.pad = bru_input;
>  	sel.target = V4L2_SEL_TGT_COMPOSE;
> @@ -486,10 +489,9 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
>  	if (ret < 0)
>  		return ret;
>  
> -	dev_dbg(vsp1->dev,
> -		"%s: set selection (%u,%u)/%ux%u on BRU pad %u\n",
> +	dev_dbg(vsp1->dev, "%s: set selection (%u,%u)/%ux%u on %s pad %u\n",
>  		__func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> -		sel.pad);
> +		bru_name, sel.pad);
>  
>  	return 0;
>  }
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux