Re: [PATCH/RFC v2 15/15] adv748x: afe: add routing support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Niklas,

On 14/12/17 19:08, Niklas Söderlund wrote:
> The adv748x afe have eight analog sink pads, currently one of them is

s/have/has/

> chosen to be the active route based on device tree configuration. Whit

s/Whit/With/

> the new routeing API it's possible to control which of the eight sink
> pads are routed to the source pad.

> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

Aha, I had been wondering how we would handle this...

Other than the minor nits, this is otherwise looking good

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

> ---
>  drivers/media/i2c/adv748x/adv748x-afe.c | 66 +++++++++++++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
> index 5188178588c9067d..5dda85c707f6efd7 100644
> --- a/drivers/media/i2c/adv748x/adv748x-afe.c
> +++ b/drivers/media/i2c/adv748x/adv748x-afe.c
> @@ -43,6 +43,9 @@
>  #define ADV748X_AFE_STD_PAL_SECAM			0xe
>  #define ADV748X_AFE_STD_PAL_SECAM_PED			0xf
>  
> +#define ADV748X_AFE_ROUTES_MAX ((ADV748X_AFE_SINK_AIN7 - \
> +				ADV748X_AFE_SINK_AIN0) + 1)
> +
>  static int adv748x_afe_read_ro_map(struct adv748x_state *state, u8 reg)
>  {
>  	int ret;
> @@ -386,10 +389,73 @@ static int adv748x_afe_set_format(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> +

No need for that extra line..

> +static int adv748x_afe_get_routing(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_routing *routing)
> +{
> +	struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
> +	struct v4l2_subdev_route *r = routing->routes;
> +	unsigned int i;
> +
> +	/* There are one possible route from each sink */

	There is one possible ...

> +	if (routing->num_routes < ADV748X_AFE_ROUTES_MAX) {
> +		routing->num_routes = ADV748X_AFE_ROUTES_MAX;
> +		return -ENOSPC;
> +	}
> +
> +	routing->num_routes = ADV748X_AFE_ROUTES_MAX;
> +
> +	for (i = ADV748X_AFE_SINK_AIN0; i <= ADV748X_AFE_SINK_AIN7; i++) {
> +		r->sink_pad = i;
> +		r->sink_stream = 0;
> +		r->source_pad = ADV748X_AFE_SOURCE;
> +		r->source_stream = 0;
> +		r->flags = afe->input == i ? V4L2_SUBDEV_ROUTE_FL_ACTIVE : 0;
> +		r++;
> +	}
> +
> +	return 0;
> +}
> +
> +static int adv748x_afe_set_routing(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_routing *routing)
> +{
> +	struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
> +	struct v4l2_subdev_route *r = routing->routes;
> +	int input = -1;
> +	unsigned int i;
> +
> +	if (routing->num_routes > ADV748X_AFE_ROUTES_MAX)
> +		return -ENOSPC;
> +
> +	for (i = 0; i < routing->num_routes; i++) {
> +		if (r->sink_pad > ADV748X_AFE_SINK_AIN7 ||
> +		    r->sink_stream != 0 ||
> +		    r->source_pad != ADV748X_AFE_SOURCE ||
> +		    r->source_stream != 0)
> +			return -EINVAL;
> +
> +		if (r->flags & V4L2_SUBDEV_ROUTE_FL_ACTIVE) {
> +			if (input != -1)
> +				return -EMLINK;
> +
> +			input = r->sink_pad;
> +		}
> +		r++;
> +	}
> +
> +	if (input != -1)
> +		afe->input = input;> +
> +	return 0;
> +}
> +
>  static const struct v4l2_subdev_pad_ops adv748x_afe_pad_ops = {
>  	.enum_mbus_code = adv748x_afe_enum_mbus_code,
>  	.set_fmt = adv748x_afe_set_format,
>  	.get_fmt = adv748x_afe_get_format,
> +	.get_routing = adv748x_afe_get_routing,
> +	.set_routing = adv748x_afe_set_routing,
>  };
>  
>  /* -----------------------------------------------------------------------------
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux