Hi Kieran,
On Thursday, 16 November 2017 16:47:11 EET Kieran Bingham wrote:
> On 16/11/17 12:32, Sakari Ailus wrote:
> > Hi Laurent,
> >
> > Thank you for the initiative to bring up and address the matter!
>
> I concur - this looks like a good start towards managing the issue.
>
> One potential thing spotted on top of Sakari's review inline below, of
> course I suspect this was more of a prototype/consideration patch.
>
> > On Thu, Nov 16, 2017 at 02:33:48AM +0200, Laurent Pinchart wrote:
> >> Device unplug being asynchronous, it naturally races with operations
> >> performed by userspace through ioctls or other file operations on video
> >> device nodes.
> >>
> >> This leads to potential access to freed memory or to other resources
> >> during device access if unplug occurs during device access. To solve
> >> this, we need to wait until all device access completes when unplugging
> >> the device, and block all further access when the device is being
> >> unplugged.
> >>
> >> Three new functions are introduced. The video_device_enter() and
> >> video_device_exit() functions must be used to mark entry and exit from
> >> all code sections where the device can be accessed. The
> >
> > I wonder if it'd help splitting this patch into two: one that introduces
> > the mechanism and the other that uses it. Up to you.
> >
> > Nevertheless, it'd be better to have other system calls covered as well.
> >
> >> video_device_unplug() function is then used in the unplug handler to
> >> mark the device as being unplugged and wait for all access to complete.
> >>
> >> As an example mark the ioctl handler as a device access section. Other
> >> file operations need to be protected too, and blocking ioctls (such as
> >> VIDIOC_DQBUF) need to be handled as well.
> >>
> >> Signed-off-by: Laurent Pinchart
> >> <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> >> ---
> >>
> >> drivers/media/v4l2-core/v4l2-dev.c | 57 ++++++++++++++++++++++++++++++++
> >> include/media/v4l2-dev.h | 47 +++++++++++++++++++++++++++++++
> >> 2 files changed, 104 insertions(+)
> >>
> >> diff --git a/drivers/media/v4l2-core/v4l2-dev.c
> >> b/drivers/media/v4l2-core/v4l2-dev.c index c647ba648805..c73c6d49e7cf
> >> 100644
> >> --- a/drivers/media/v4l2-core/v4l2-dev.c
> >> +++ b/drivers/media/v4l2-core/v4l2-dev.c
[snip]
> >> @@ -351,6 +397,10 @@ static long v4l2_ioctl(struct file *filp, unsigned
> >> int cmd, unsigned long arg)
> >> struct video_device *vdev = video_devdata(filp);
> >> int ret = -ENODEV;
> >
> > You could leave ret unassigned here.
> >
> >> + ret = video_device_enter(vdev);
> >> + if (ret < 0)
> >> + return ret;
> >> +
> >> if (vdev->fops->unlocked_ioctl) {
> >> struct mutex *lock = v4l2_ioctl_get_lock(vdev, cmd);
> >>
> >> @@ -358,11 +408,14 @@ static long v4l2_ioctl(struct file *filp, unsigned
> >> int cmd, unsigned long arg)
> >> return -ERESTARTSYS;
>
> It looks like that return -ERESTARTSYS might need a video_device_exit() too?
Oops. Of course. I'll fix that. Thanks for catching the issue.
> >> if (video_is_registered(vdev))
> >> ret = vdev->fops->unlocked_ioctl(filp, cmd, arg);
> >> + else
> >> + ret = -ENODEV;
> >> if (lock)
> >> mutex_unlock(lock);
> >> } else
> >> ret = -ENOTTY;
> >>
> >> + video_device_exit(vdev);
> >> return ret;
> >> }
--
Regards,
Laurent Pinchart
