From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> Although there is a HDMI connector on the q7 carrier board it is not connected to the RZ/G1M SoC. One must use the HDMI connector on the camera daughter board. This patch adds support for this connector. Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> Reviewed-by: Biju Das <biju.das@xxxxxxxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx> --- arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi | 75 ++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi index 31fab5f183a9..4db18f2ef303 100644 --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -13,6 +13,37 @@ serial1 = &scif1; serial4 = &hscif1; }; + + cec_clock: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; }; &hscif1 { @@ -23,7 +54,51 @@ status = "okay"; }; +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cec_clock>; + clock-names = "cec"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &pfc { + du_pins: du { + groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; + function = "du"; + }; + hscif1_pins: hscif1 { groups = "hscif1_data_c", "hscif1_ctrl_c"; function = "hscif1"; -- 2.11.0