On 12/04/2017 05:13 PM, Thomas Petazzoni wrote:
Not all variants of the sh_eth hardware have Gigabit
support. Unfortunately, the current driver doesn't update
phydev->supported depending on the MAC capabilities. Due to this, if
you have a Gigabit capable PHY, the PHY will advertise its Gigabit
capability and establish a link at 1Gbit/s, even though the MAC
doesn't support it.
In order to avoid this, we mark phydev->supported if we're running a
non-Gigabit capable hardware.
Tested on a SH7786 platform, with a Gigabit PHY.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/renesas/sh_eth.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index db72d13cebb9..0074c5998481 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1892,6 +1892,11 @@ static int sh_eth_phy_init(struct net_device *ndev)
return PTR_ERR(phydev);
}
+ /* mask with MAC supported features */
+ if (mdp->cd->register_type != SH_ETH_REG_GIGABIT)
+ phydev->supported &= PHY_BASIC_FEATURES;
+ phydev->advertising = phydev->supported;
+
Um, looking at this again, I think we have phy_set_max_speed() for that
kind of stuff now...
[...]
MBR, Sergei
