On Fri, Nov 24, 2017 at 11:59:44PM +0300, Sergei Shtylyov wrote:
> Add the initial device tree for the V3M Starter Kit board.
> The board has 1 debug serial port (SCIF0); include support for it,
> so that the serial console can work.
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>
> ---
> arch/arm64/boot/dts/renesas/Makefile | 2 -
> arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 44 +++++++++++++++++++++++++
> 2 files changed, 45 insertions(+), 1 deletion(-)
>
> Index: renesas/arch/arm64/boot/dts/renesas/Makefile
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/Makefile
> +++ renesas/arch/arm64/boot/dts/renesas/Makefile
> @@ -7,7 +7,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es
> dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
> dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
> dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
> -dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb
> +dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
> dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
>
> always := $(dtb-y)
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
> ===================================================================
> --- /dev/null
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
> @@ -0,0 +1,44 @@
> +/*
> + * Device Tree Source for the V3M Starter Kit board
> + *
> + * Copyright (C) 2017 Renesas Electronics Corp.
> + * Copyright (C) 2017 Cogent Embedded, Inc.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +#include "r8a77970.dtsi"
> +
> +/ {
> + model = "Renesas V3M Starter Kit board";
> + compatible = "renesas,v3msk", "renesas,r8a77970";
> +
> + aliases {
> + serial0 = &scif0;
> + };
> +
> + chosen {
For consistency with other Renesas boards I would like to request the
following be added here:
bootargs = "ignore_loglevel rw";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@48000000 {
> + device_type = "memory";
> + /* first 128MB is reserved for secure area. */
> + reg = <0x0 0x48000000 0x0 0x38000000>;
> + };
> +};
> +
> +&extal_clk {
> + clock-frequency = <16666666>;
> +};
> +
> +&extalr_clk {
> + clock-frequency = <32768>;
> +};
> +
> +&scif0 {
> + status = "okay";
> +};
>
