Drivers do not need to call mmc_gpiod_request_cd_irq() explicitly
because mmc_start_host() calls it. To make it work, cd_gpio must
be set before mmc_add_host().
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
Changes in v2: None
drivers/mmc/host/tmio_mmc_core.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 46f77c3..efffb04 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -1205,6 +1205,12 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
if (ret < 0)
return ret;
+ if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
+ ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0);
+ if (ret)
+ return ret;
+ }
+
mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
mmc->caps2 |= pdata->capabilities2;
mmc->max_segs = pdata->max_segs ? : 32;
@@ -1300,14 +1306,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
- if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
- ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0);
- if (ret)
- goto remove_host;
-
- mmc_gpiod_request_cd_irq(mmc);
- }
-
return 0;
remove_host:
--
2.7.4
