Hello Geert,
> >
> > > --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> > > +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> > > @@ -11,6 +11,7 @@
> > > / {
> > > aliases {
> > > serial0 = &scif0;
> > > + serial3 = &scifb1;
> >
> > Given this port is not labeled "serial3", but called "data uart", you may want
> > to add a comment to avoid confusion:
>
> It's a little bit confusing, isn't it? The lines related to such interface are named as UART0_x on the carrier board schematic, the section
> of the schematic that contains the header is named "data uart header", and the board documentation names it explicitly as "UART 3 -
> /dev/ttySC3 (SCIFB1)".
>
> I don't think there is anything we can do to make this easier for the user really, is there? :D
> If we decide to add a comment to serial 3, I guess we need to be consistent and add comments for the other serial interfaces too.
> If you still prefer having a comment there I'll send a v2 and patch(es) for adding comments to the other interfaces, just let me know.
Any thoughts about this?
Thanks,
Fab
>
> Thanks,
> Fab
>
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
