From: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx> This supports TCA9539 gpio expanders on I2C4 bus on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx> --- arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 80444aee7bcb..a6c2343e23cb 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -66,6 +66,28 @@ }; }; +&i2c4 { + gpio_exp_76: gpio@76 { + compatible = "ti,tca9539"; + reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + + gpio_exp_77: gpio@77 { + compatible = "ti,tca9539"; + reg = <0x77>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &ohci0 { status = "okay"; }; -- 2.11.0