Move R-Car H3 ES1.x I/O voltage support over to the generic way to
describe IOCTRL registers, which will be needed for suspend/resume
support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
index 229192cf8e7430af..c864b0e52d93575b 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
@@ -5423,12 +5423,21 @@ static const struct pinmux_drive_reg pinmux_drive_regs[] = {
{ },
};
+enum ioctrl_regs {
+ POCCTRL,
+};
+
+static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = {
+ [POCCTRL] = { 0xe6060380, },
+ { },
+};
+
static int r8a7795es1_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin,
u32 *pocctrl)
{
int bit = -EINVAL;
- *pocctrl = 0xe6060380;
+ *pocctrl = pinmux_ioctrl_regs[POCCTRL].reg;
if (pin >= RCAR_GP_PIN(3, 0) && pin <= RCAR_GP_PIN(3, 11))
bit = pin & 0x1f;
@@ -5745,6 +5754,7 @@ const struct sh_pfc_soc_info r8a7795es1_pinmux_info = {
.cfg_regs = pinmux_config_regs,
.drive_regs = pinmux_drive_regs,
.bias_regs = pinmux_bias_regs,
+ .ioctrl_regs = pinmux_ioctrl_regs,
.pinmux_data = pinmux_data,
.pinmux_data_size = ARRAY_SIZE(pinmux_data),
--
2.7.4
