On Sun, Oct 01, 2017 at 07:36:14PM +0200, jacopo mondi wrote:
> Hi Seregei,
>
> On Sat, Sep 30, 2017 at 01:36:18PM +0300, Sergei Shtylyov wrote:
> > Hello!
> >
> > On 9/29/2017 2:53 PM, Simon Horman wrote:
> >
> > >From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > >
> > >Add device nodes for user leds on gr-peach board.
> > >
> > >Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > >Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > >Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> > >---
> > > arch/arm/boot/dts/r7s72100-gr-peach.dts | 10 ++++++++++
> > > 1 file changed, 10 insertions(+)
> > >
> > >diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
> > >index bcfa6445bbaa..13d745bb56a5 100644
> > >--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
> > >+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
> > [...]
> > >@@ -51,6 +52,15 @@
> > > reg = <0x00600000 0x00200000>;
> > > };
> > > };
> > >+
> > >+leds {
> >
> > Not indented properly...
>
> Thanks!
>
> Simon, as you sent pull request already, will we need a patch on top
> of this to fix it?
Thanks, please do.
I don't think we need to re-spin the pull-request to correct this,
rather, a follow-up patch can be provided in a follow-up pull-request.
>
> Thanks
> j
> >
> > >+ status = "okay";
> > >+ compatible = "gpio-leds";
> > >+
> > >+ led1 {
> > >+ gpios = <&port6 12 GPIO_ACTIVE_HIGH>;
> > >+ };
> > >+ };
> > > };
> > > &pinctrl {
> >
> > MBR, Sergei
>
