Hi Kieran,
On Monday, 25 September 2017 20:25:14 EEST Kieran Bingham wrote:
> On 15/08/17 23:57, Laurent Pinchart wrote:
> > The KMS API supports enabling a CRTC without any plane. To enable that
> > use case, we need to start the pipeline when configuring the LIF,
> > instead of when enabling the first plane.
>
> Tested and verified on Salvator-X ES1.0 using the KMS Test suite, including
> suspend/resume, in combination with the "[PATCH 0/3] R-Car DU: Clip planes
> to screen boundaries" series.
>
> Tested-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
>
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
>
> > ---
> >
> > drivers/media/platform/vsp1/vsp1_drm.c | 37 ++++++++++++++++++++---------
> > 1 file changed, 27 insertions(+), 10 deletions(-)
> >
> > This patch is based on top of the VSP+DU large patch series queued through
> > Dave's DRM tree for v4.14-rc1. It doesn't can't be merged independently
> > through the linux-media tree for the same kernel version. As the change is
> > not urgent, it can be delayed until v4.15-rc1.
> >
> > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
> > b/drivers/media/platform/vsp1/vsp1_drm.c index 4dfbeac8f42c..7ce69f23f50a
> > 100644
> > --- a/drivers/media/platform/vsp1/vsp1_drm.c
> > +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> > @@ -84,8 +84,12 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int
> > pipe_index,>
> > struct vsp1_drm_pipeline *drm_pipe;
> > struct vsp1_pipeline *pipe;
> > struct vsp1_bru *bru;
> >
> > + struct vsp1_entity *entity;
> > + struct vsp1_entity *next;
> > + struct vsp1_dl_list *dl;
> >
> > struct v4l2_subdev_format format;
> > const char *bru_name;
> >
> > + unsigned long flags;
> >
> > unsigned int i;
> > int ret;
> >
> > @@ -250,6 +254,29 @@ int vsp1_du_setup_lif(struct device *dev, unsigned
> > int pipe_index,>
> > vsp1_write(vsp1, VI6_DISP_IRQ_STA, 0);
> > vsp1_write(vsp1, VI6_DISP_IRQ_ENB, 0);
> >
> > + /* Configure all entities in the pipeline. */
> > + dl = vsp1_dl_list_get(pipe->output->dlm);
> > +
> > + list_for_each_entry_safe(entity, next, &pipe->entities, list_pipe) {
> > + vsp1_entity_route_setup(entity, pipe, dl);
> > +
> > + if (entity->ops->configure) {
> > + entity->ops->configure(entity, pipe, dl,
> > + VSP1_ENTITY_PARAMS_INIT);
> > + entity->ops->configure(entity, pipe, dl,
> > + VSP1_ENTITY_PARAMS_RUNTIME);
> > + entity->ops->configure(entity, pipe, dl,
> > + VSP1_ENTITY_PARAMS_PARTITION);
> > + }
>
> Hrm ... this configure section now has quite a lot duplicated from the
> vsp1_du_atomic_flush(). Perhaps we could abstract that part out to a common
> function - but I don't think that's essential.
Let's do so on top of your pending patches then. Feel free to give it a go if
you want to ;-)
> > + }
> > +
> > + vsp1_dl_list_commit(dl);
> > +
> > + /* Start the pipeline. */
> > + spin_lock_irqsave(&pipe->irqlock, flags);
> > + vsp1_pipeline_run(pipe);
> > + spin_unlock_irqrestore(&pipe->irqlock, flags);
> > +
> >
> > dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__);
> >
> > return 0;
> >
> > @@ -488,7 +515,6 @@ void vsp1_du_atomic_flush(struct device *dev, unsigned
> > int pipe_index)>
> > struct vsp1_entity *next;
> > struct vsp1_dl_list *dl;
> > const char *bru_name;
> >
> > - unsigned long flags;
> >
> > unsigned int i;
> > int ret;
> >
> > @@ -570,15 +596,6 @@ void vsp1_du_atomic_flush(struct device *dev,
> > unsigned int pipe_index)>
> > }
> >
> > vsp1_dl_list_commit(dl);
> >
> > -
> > - /* Start or stop the pipeline if needed. */
> > - if (!drm_pipe->enabled && pipe->num_inputs) {
> > - spin_lock_irqsave(&pipe->irqlock, flags);
> > - vsp1_pipeline_run(pipe);
> > - spin_unlock_irqrestore(&pipe->irqlock, flags);
> > - } else if (drm_pipe->enabled && !pipe->num_inputs) {
> > - vsp1_pipeline_stop(pipe);
> > - }
> >
> > }
> > EXPORT_SYMBOL_GPL(vsp1_du_atomic_flush);
--
Regards,
Laurent Pinchart
