Re: [PATCH 10/11] arm64: dts: renesas: initial Eagle board device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/13/2017 12:19 AM, Sergei Shtylyov wrote:

Add the initial device  tree for  the R8A77970 SoC based Eagle board.
The board has 1 debug serial port (SCIF0); include support for it,
so that the serial console can work.

Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@xxxxxxxxxxxxxxxxxx>.

Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>

[...]
Index: renesas/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
===================================================================
--- /dev/null
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -0,0 +1,45 @@
[...]
+&extal_clk {
+    clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+    clock-frequency = <32768>;
+};
+

    Forgot to specify SCIF_CLK -- it's populated.

Unfortunately, the kernel hangs after ttySC0 is registered if I specify this frequency...

MBR, Sergei



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux