Hi Simon-san,
> From: Simon Horman
> Sent: Wednesday, September 13, 2017 4:50 PM
>
> On Wed, Sep 13, 2017 at 03:52:08PM +0900, Yoshihiro Shimoda wrote:
> > This patch adds GPIO device nodes for r8a77995.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> > This patch should be applied after the following patch is applied:
> > "gpio: rcar: Add r8a77995 (R-Car D3) support".
>
> I think it can be applied in parallel with that patch as the driver
> will match on "renesas,rcar-gen3-gpio". Right?
That's right.
My little concern was checkpatch.pl output warning if we didn't applied
the gpio patch :)
Best regards,
Yoshihiro Shimoda
> > arch/arm64/boot/dts/renesas/r8a77995.dtsi | 112 ++++++++++++++++++++++++++++++
> > 1 file changed, 112 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> > index 84b6bd5..a1c9271 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> > @@ -139,6 +139,118 @@
> > #power-domain-cells = <1>;
> > };
> >
> > + gpio0: gpio@e6050000 {
> > + compatible = "renesas,gpio-r8a77995",
> > + "renesas,rcar-gen3-gpio",
> > + "renesas,gpio-rcar";
> > + reg = <0 0xe6050000 0 0x50>;
> > + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> > + #gpio-cells = <2>;
> > + gpio-controller;
> > + gpio-ranges = <&pfc 0 0 9>;
> > + #interrupt-cells = <2>;
> > + interrupt-controller;
> > + clocks = <&cpg CPG_MOD 912>;
> > + power-domains = <&cpg>;
> > + resets = <&cpg 912>;
> > + };
>
> ...
