Re: [PATCH 08/18] arm64: dts: ulcb-kf: enable CAN0/1

[Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>]

Hello!

On 9/7/2017 1:36 AM, Vladimir Barinov wrote:

> This supports CAN0/1 on ULCB Kingfisher board
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 26 ++++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> index 2449915..ca8de1a 100644
> --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> @@ -16,6 +16,22 @@
>   	};
>   };
>   
> +&can0 {
> +	pinctrl-0 = <&can0_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	renesas,can-clock-select = <0x0>;
> +};
> +
> +&can1 {
> +	pinctrl-0 = <&can1_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	renesas,can-clock-select = <0x0>;

   IIRC, you can omit these Renesas specific props -- the driver uses 0 if it 
doesn't find the prop.

[...]

MBR, Sergei