[PATCH 18/18] arm64: dts: ulcb-kf: hog USB3 hub control gpios

[Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>]

This adds gpio hogs for USB3 hub on ULCB Kingfisher board to power up and
remove from reset the hub

Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 0c3844f..7bb9793 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -57,6 +57,20 @@
 		interrupt-controller;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		hub_pwen {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HUB pwen";
+		};
+
+		hub_rst {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HUB rst";
+		};
 	};
 
 	gpio_exp_75: pca9539@75 {
-- 
1.9.1