[PATCH v3 0/4] phy: rcar-gen3-usb2: add support for r8a77995

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch set is based on the latest phy.git / next branch
(the commit id = d9c51f4c53ae2af03aa8bd001d46f21b0adcdab8).

After this patch set is applied, a usb 2.0 host node that is combined
with usb 2.0 peripheral needs 'dr_mode = "otg";' property.

Changes from v2:
 - Revise the commit log ("SoCs" is not third-person singular present).

Changes from v1:
 - Revise typo "wronly" to "wrongly".
 - Remove RCAR_GEN3_PHY_HAS_DEDICATED_PINS from generic gen3 entry in
   patch 3/4
 - Remove the driver change from patch 4/4.
 - Revise the commit log of patch 4/4.

Yoshihiro Shimoda (4):
  phy: rcar-gen3-usb2: check dr_mode for otg mode
  phy: rcar-gen3-usb2: split the two meaning of "has_otg"
  phy: rcar-gen3-usb2: add SoC-specific parameter for dedicated pins
  phy: rcar-gen3-usb2: add binding for r8a77995

 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  2 +
 drivers/phy/renesas/phy-rcar-gen3-usb2.c           | 93 ++++++++++++++++------
 2 files changed, 69 insertions(+), 26 deletions(-)

-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux