[PATCH 0/5] Add USB2.0 Host support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This series aims to add USB2.0 Host support on iWave RZ/G1M(r8a7743)
based board.

This series has been tested against renesas-dev tag 20170830-v4.13-rc7

This patch has documentation dependency on below patches
 * PCI: rcar: Add r8a7743/5 support
https://patchwork.kernel.org/patch/9919697/
 * phy: rcar-gen2: Add r8a7743/5 support
https://patchwork.kernel.org/patch/9919727/

Biju Das (5):
  ARM: dts: r8a7743: Add internal PCI bridge nodes
  ARM: dts: r8a7743: Add USB PHY DT support
  ARM: dts: r8a7743: Link PCI USB devices to USB PHY
  ARM: dts: iwg20d-q7: Enable internal PCI
  ARM: dts: iwg20d-q7: Enable USB PHY

 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 26 ++++++++++
 arch/arm/boot/dts/r8a7743.dtsi          | 92 +++++++++++++++++++++++++++++++++
 2 files changed, 118 insertions(+)

-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux