On Wed, Aug 30, 2017 at 10:06:30AM +0200, Simon Horman wrote:
> On Thu, Apr 27, 2017 at 05:40:51PM +0300, Laurent Pinchart wrote:
> > Hi Ulrich,
> >
> > Thank you for the patch.
> >
> > On Thursday 27 Apr 2017 16:37:42 Ulrich Hecht wrote:
> > > From: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
> > >
> > > This patch enables PWM2 for Salvator-X board on R8A7795 SoC.
> > >
> > > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
> > > Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 12 ++++++++++++
> > > 1 file changed, 12 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> > > b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 8558b27..534b17e
> > > 100644
> > > --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> > > +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> > > @@ -381,6 +381,11 @@
> > > function = "pwm1";
> > > };
> > >
> > > + pwm2_pins: pwm2 {
> > > + groups = "pwm2_a";
> > > + function = "pwm2";
> > > + };
> > > +
> > > sdhi0_pins: sd0 {
> > > groups = "sdhi0_data4", "sdhi0_ctrl";
> > > function = "sdhi0";
> > > @@ -463,6 +468,13 @@
> > > status = "okay";
> > > };
> > >
> > > +&pwm2 {
> > > + /* PMIC DC/DC switching frequency synchronization */
> >
> > Please pardon the stupid question, but if the PWM channel is used by the PMIC,
> > is there a point in enabling it without a PMIC DT node using it ?
>
> Hi Ulrich,
>
> I'm wondering if you have any plans to follow-up on this patch.
And likewise
"[v2,5/8] arm64: dts: r8a7796-salvator-x: Add PWM device support"
